ACS Phone: +43 7228 20088 0

… always

a cable length ahead!

THERM 180 EWKF-C

Application

These cables are ideal for use everywhere, where increased mechanical stresses for the installation and operation are required. Silicone-rubber-insulated cables are used for all applications where the cable insulation is subjected to high temperature fluctuations. Suitable for installation at high temperature influence in dry, damp and in the open air. As flexible connecting cable for low mechanical stress i.e. sauna, solar installations, foundries and steel plants. This cable can be used for fixed installation only in open and ventilated cable tubes and cable ducts. An interference-free transmission of signals and pulse is assured by the high screening density. The ideal interference-protected silicone multicore flexible cable for such applications as given above.

art. no.
 dimensions
 colour
 outer-Ø
 weight
01245015 2 x 1,5 black 10,8 170
01245019 2 x 2,5 black 12 230
01245022 2 x 4 black 14,2 308
01245025 2 x 6 black 15,8 418
01245003 3 G 1 black 9,6 154
01245002 3 G 1,5 black 11,3 190
01245020 3 G 2,5 black 12,9 275
01245023 3 G 4 black 14,9 364
01245026 3 G 6 black 16,6 612
01245014 4 G 1 black 10,7 176
01245007 4 G 1,5 black 12,1 231
01245004 4 G 2,5 black 14 340
01245001 4 G 4 black 16 448
01245027 4 G 6 black 18,1 781
01245009 5 G 1,5 black 13 282
01245021 5 G 2,5 black 14,8 395
01245024 5 G 4 black 17,4 630
01245028 5 G 6 black 20 980
01245005 7 G 1,5 black 13 342
01245016 12 G 1,5 black 17,2 531
01245017 16 G 1,5 black 20 660
01245018 20 G 1,5 black 21,3 766
inner conductor tinned copper, fine wire conductors, bunch stranded to DIN VDE 0295 cl. 5, BS 6360 cl. 5 and IEC 60228 cl. 5
core insulation silicone-rubber
core colour code acc. DIN VDE 0293 or HD 308 S2
stranding element cores stranded in layers with optimal lay-length
coat silicone-rubber
overall shield tinned copper braided screaning
outer sheath material special-silicone rubber, notch resistant

adapted to DIN VDE 0250 part 816
CE = The product is conformed with the EC Low-Voltage Directive 2014/35/EU.

inner conductor tinned copper, fine wire conductors, bunch stranded to DIN VDE 0295 cl. 5, BS 6360 cl. 5 and IEC 60228 cl. 5
core insulation silicone-rubber
core colour code acc. DIN VDE 0293 or HD 308 S2
stranding element cores stranded in layers with optimal lay-length
coat silicone-rubber
overall shield tinned copper braided screaning
outer sheath material special-silicone rubber, notch resistant
rated voltage Uo/U: 300/500 V
test voltage 2000 V
breakdown voltage min. 5000 V
insulation resistance min. 200 MOhm x km
bending radius moved 10
bending radius fixed 5
operation temp. fixed -60°C … +180°C, short-time +220°C
operation temp. moved -25°C … +180°C
conductor temp max. +180°C
halogenfree acc. to VDE 0482 part 267, DIN EN 50267-2-2, IEC 60754-2
radiation resistance up to 20x106 cJ/kg (up to 20 Mrad)
corrosivity of combustion gases to IEC 60754-2 or VDE 0482 Teil 267-2-3
fire behavior no flame propagation, leaves in case of fire insulating SiO2, test acc. to DIN VDE 0482 - 332-1-2, DIN EN 60332-1-2, IEC 60332-1

Contact

Export

Division Management

Veronika Jautz

Czech Republic and Slovakia

phone +43 7228 20088 132
Fax +43 7228 20088 200
jautz.veronika@acs.at